Talk about Train and Town Hobbies

Visit our Affiliated Pages:
Building temporary and permanent railroads with big model trains
Return to Family Garden Trains Home page
Visit Family Christmas Online
Big Christmas Trains: Directory of Large Scale and O Scale trains with holiday themes Free building projects for your vintage railroad or Christmas village. Visit Howard Lamey's own web page, LittleGlitterHouses.com

It is currently Fri Nov 08, 2024 6:46 am

Note: This site has just been moved to a new server with slightly different software. We've tried to make certain that nothing important has been lost, but if you notice any broken links or other issues, please let us know as soon as possible by using the contact page.


All times are UTC - 5 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Simple tinplate project
PostPosted: Tue Jun 25, 2024 7:18 am 
Offline

Joined: Sat Sep 06, 2014 7:05 am
Posts: 614
I've had a beat up American Flyer 3011 sand car in the parts bin for quite a while. My original intention was to either give it a refurb or simply strip it for usable parts. Instead, I decided to make a military flat car out of it.

First step was to remove the body from the frame. Pretty easy, just straighten up eight tabs and lift it off. Unlike the Lionel 902, the brake-wheel and stanchion on the 3013 is attached to the body only and doesn't pass through the frame. I'll save the body in case I decide at some point to reassemble the car. I have a source for a replacement brake-wheel should I decide to do that.

Next step was to remove the the bits from the frame. Wheels, axles, and journals are easy enough. The wheels and axles come out with just a minor flex of the frame. I used the Dremel and a wire wheel to polish off the coating of rust and shine them up a bit, then set them aside. The journals are each attached with a pair of tabs...just bend the bottom one straight and they are easily removed. I have an old can of Brasso that I used to shine them up. That and a buffing wheel on the Dremel has them looking pretty smart.

Image

The tab/slot couplers are a different matter. Both are missing their tabs, whether they broke off sometime in the last 90 years or someone purposely removed them, not sure (although I don't know why someone would purposely remove them). I couldn't find replacements (didn't try too hard, I'll admit). No worries, I'm feeling lazy and slot-only will work as long as the next car in the string still has its tab(s). The other thing is these are riveted in, so you'd have to drill them out and re-rivet them to get them back on. Initially I intended to repaint the frame, but the original paint is in nice shape with just a few scratches so I'm going to leave that be. I used the Dremel and wire-wheel to polish up the couplers in place as best as I could.

The last step in this initial phase was to drill one additional hole for possible use in mounting the load. Easy enough; once that was done, I polished the frame with a bit of Turtle Wax polishing compound, then a bit of Meguiar's cleaning wax. Once that was done, I reinstalled the journals, wheels, and axles.

Image

I ordered a number of 3D-printed items from a printer I've used a number of times for other stuff. Assembled one of the 3D-printed kits and gave it a paint job. At 1/56-scale, it's slightly small for O-gauge (1/48), but it's tinplate, so who cares:

Image

A French FT-17 of WWI vintage, it probably should have some serial numbers on it, and maybe one of the playing-card platoon/section markings. I might go back and give it an overspray of Tamiya clear gloss...that might make it a bit more attuned to the tinplate look. I do think it has the look of some of the military-themed offerings of Marx, Marklin, and Elastolin during the interwar era.

Anyway, an easy project that found use for a battered old gondola.


Top
 Profile  
 
PostPosted: Tue Aug 27, 2024 6:41 am 
Offline

Joined: Sat Sep 06, 2014 7:05 am
Posts: 614
We changed the project up a bit, restoring the Flyer gondola body to its frame after a repaint using some metallic red automobile paint. A bit of an experiment, the results were mixed. Despite stripping/cleaning the body thoroughly, the finish proved rather uneven, appearing blotchy in places. Likely should have used a primer of some sort, but I'm not going back and start over.

The "tank" car project moved to a Marx gondola frame, this from a battered 552 that had suffered some deep scratching and corrosion on one side. The frame/wheels/axles/couplers were all in good shape, however, so a perfect candidate. After removing the gondola body, I gave the black frame a respray of satin black after a bit of masking:

Image

The tank got some reworking as well. I gave the paint scheme a bit of outlining similar to the "lozenge" schemes used by the French during the war, then an overspray of clear satin lacquer. I think this gives it more of a toy-like appearance, similar to the stuff Elastolin made during the interwar years.

A strip of styrene and a self-threading screw fastens the tank to the frame using the existing hole.

I don't have much Marx equipment in the collection, but I've always had interest in their military-themed trains and toys. This might be the start of something.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron


Click to see sturdy Lionel(r) trains that are perfect for your Christmas tree.


Visit our affiliated sites:
- Trains and Hobbies -
Return to Big Indoor Trains Home page
Return to Family Garden Trains Home page
Big Indoor Trains Primer Articles: All about setting up and displaying indoor display trains and towns. Garden Railroading Primer Articles: All about getting a Garden Railroad up and running well
On30 and O Gauge trains to go with indoor display villages and railroads
Big Christmas Trains: Directory of Large Scale and O Scale trains with holiday themes
Visit Lionel Trains. Free building projects for your vintage railroad or Christmas village. Click to see Thomas Kinkaded-inspired Holiday Trains and Villages. Big Christmas Train Primer: Choosing and using model trains with holiday themes Visit Howard Lamey's glitterhouse gallery, with free project plans, graphics, and instructions. Click to see HO scale trains with your favorite team's colors.
- Family Activities and Crafts -
Click to see reviews of our favorite family-friendly Christmas movies. Free, Family-Friendly Christmas Stories Decorate your tree the old-fashioned way with these kid-friendly projects. Free plans and instructions for starting a hobby building vintage-style cardboard Christmas houses. Click to find free, family-friendly Christmas poems and - in some cases - their stories. Traditional Home-Made Ornaments
- Christmas Memories and Collectibles -
Visit the FamilyChristmasOnline site. Visit Howard Lamey's glitterhouse gallery, with free project plans, graphics, and instructions. Visit Papa Ted Althof's extensive history and collection of putz houses, the largest and most complete such resource on the Internet.. Click to return to the Old Christmas Tree Lights Table of Contents Page Craft and collectibles blog with local news of Croton NY.
Click to visit Fred's Noel-Kat store.
- Music -
Carols of many countries, including music, lyrics, and the story behind the songs Wax recordings from the early 1900s, mostly collected by George Nelson.  Download them all for a 'period' album.
Best-loved railroad songs and the stories behind them.
Heartland-inspired music, history, and acoustic instrument tips. Own a guitar, banjo, or mandolin?  Want to play an instrument?  Tips to save you money and time, and keep your instrument playable. Own a guitar, banjo, or mandolin?  Want to play an instrument?  Tips to save you money and time, and keep your instrument playable.
Powered by phpBB® Forum Software © phpBB Group